Liquid specific gravity | 1.84g/㎤ |
---|---|
Design pressure | Atmospheric pressure |
Design pressure | Atmospheric pressure |
(L) |
Outer diameter (D) |
Height of straight body part | Total height | Nozzle setting position at the top of tank | Manhole at the top of tank | Anchor hole | Anchor bolts PCD | Framed weight (kg) | Notes | Data |
---|---|---|---|---|---|---|---|---|---|---|
1,000 | 1,060 | 1,255 | 1,494 | 430 | φ485 | 4×φ15 | ≒1,110 | ≒126 | Standard SUS frame included | |
1,500 | 1,275 | 1,395 | 1,740 | 450 | φ485 | 4×φ15 | ≒1,325 | ≒160 | Standard SUS frame included | |
2,000 | 1,410 | 1,555 | 1,933 | 500 | φ485 | 4×φ15 | ≒1,460 | ≒190 | Standard SUS frame included | |
3,000 | 1,620 | 1,650 | 2,100 | 555 | φ485 | 4×φ15 | ≒1,670 | ≒225 | Standard SUS frame included | |
4,000 | 1,800 | 1,810 | 2,117 | 600 | φ485 | 6×φ15 | ≒1,850 | ≒315 | Standard SUS frame included | |
5,000 | 1,800 | 2,080 | 2,398 | 600 | φ485 | 6×φ15 | ≒1,850 | ≒350 | Standard SUS frame included | |
6,000 | 2,000 | 2,150 | 2,521 | 710 | φ485 | 6×φ15 | ≒2,050 | ≒400 | Standard SUS frame included | |
8,000 | 2,145 | 2,540 | 2,926 | 760 | φ485 | 6×φ19 | ≒2,205 | ≒575 | Standard SUS frame included | |
10,000 | 2,335 | 2,675 | 3,055 | 860 | φ485 | 6×φ19 | ≒2,395 | ≒675 | Standard SUS frame included | |
15,000 | 2,585 | 3,180 | 3,610 | 955 | φ485 | 9×φ19 | ≒2,645 | ≒945 | Standard SUS frame included | |
20,000 | 2,850 | 3,600 | 3,975 | 1,000 | φ485 | 12×φ19 | ≒2,910 | ≒1,140 | Standard SUS frame included | |
30,000 | 2,900 | 5,000 | 5,430 | 1,060 | φ485 | 18×φ25 | ≒2,980 | ≒1,895 | Standard SUS frame included | |
40,000 | 2,970 | 6,235 | 6,675 | 1,005 | φ485 | 18×φ33 | ≒3,060 | ≒2,645 | Standard SUS frame included | |
50,000 | 3,315 | 6,200 | 6,600 | 1,150 | φ485 | 24×φ33 | ≒3,405 | ≒3,150 | Standard SUS frame included |
Caution!
After assembling and installing the tank and performing a water-filling test, please wipe down and completely remove all of the water used in the test. Also, make sure that no moisture remains on the tank. Any remaining water moisture may react with the sulfuric acid during filling to generate heat and potentially melting or damaging the tank.